Sunglo Natural Gas Patio Heaters - Permanent Mount, Control Option: Manual Ignition, Color: Glass Black, Finish: Powder-Coat

Sunglo Natural Gas Patio Heaters - Permanent Mount, Control Option: Manual Ignition, Color: Glass Black, Finish: Powder-Coat Review

Sunglo Natural Gas Patio Heaters - Permanent Mount, Control Option: Manual Ignition, Color: Glass Black, Finish: Powder-Coat Feature

• Image May Vary - Please See Product Title for Actual Size and Color!
• All Natural Gas line hookups should be done by a qualified Natural Gas Technician for your safety
• Includes post, heater head, and reflector
• Call your local Natural Gas Company before installation
• Sun Glo Patio Heaters can have a heating radius of up to 15 feet depending on conditions

Sunglo Natural Gas Patio Heaters - Permanent Mount, Control Option: Manual Ignition, Color: Glass Black, Finish: Powder-Coat Overview

Sunglo Natural Gas Patio Heaters - Permanent MountKeep guests toasty and warm during the cool evening hours with this permanent mount outdoor heater. Heat coverage from this unit varies depending on the patio's wind exposure but average spacing between heaters is 12 feet apart. This heater offers a large deep disk aluminum reflector for maximum comfort, a primary aerated burner for minimal noise, and reliable safety shutoff. The post is available in a glass black powder-coat finish or 304 stainless steel. The PSA265 heater is available with a variety of control systems. The manual ignition heater requires no electrical connection and is the easiest to service and maintain. The heater utilizes a pilot-thermocouple 100 percent safety shutoff. The pilot for this heater must be manually lit. The unit is turned off/on with a manual control knob conveniently located on the front.The Non-"E" Series heater requires electrical 24 VAC to be connected in order to operate the main burner. This heater utilizes a pilot-thermocouple with 100 percent safety shutoff and the pilot must be manually lit via the direct spark system. The unit is then turned on/off with an electrical switch, timer, or other control device by interrupting the 24 VAC supply. The control device for this unit must be supplied by the installer. Manual control knob must be set to the ON position for this heater to operate with an electrical switch. This unit requires an external 24 VAC source.The "E" Series heater requires 24 VAC electrical to be connected in order to operate. This heater cannot be manually lit and it uses an electronic ignition and monitors the heater through flame rectification. The unit is turned off/on with electrical switch, timer, or other control device by interrupting the 24 VAC supply to the heater. The control device for this unit must be supplied by the installer. This unit requires an external 24 VAC source.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Jun 09, 2011 01:35:14